Filtering Solutions for the Pharmaceutical Industry
Temporary Filters
- Do not affect fluid flow
- Custom-made manufacturing
The sintering process optimizes filter media permeability and minimizes the risk of cross-contamination.
Temporary Filters
TS1/TS2 temporary filters are designed for applications in the pharmaceutical industry, where product purity, process safety, and regulatory compliance are essential.
They are installed between flanges to remove solid particles in fluid handling systems, preventing batch contamination and degradation of critical equipment.
These filters can be used temporarily during plant start-up, maintenance shutdowns, or as a permanent solution to protect sensitive equipment in pharmaceutical processes.
Pharmaceutical Applications
Protection of Critical Equipment
- Prevent particle entry into pumps, valves, and reactors
- Reduce the risk of blockage and failure in fluid transport systems
Filtration in Steam and Compressed Air Systems
- Eliminate contaminants in air systems to avoid impurities in manufacturing and packaging processes
- Suitable for use in steam lines for sterilization and cleaning
Ingredient Loading Processes
- Installed in vacuum loading systems to avoid cross-contamination
- Help maintain product integrity by preventing environmental residue ingress
Cross-Contamination Prevention
- Capture residues generated during maintenance and batch changes
- Enable strict impurity control in pharmaceutical production processes
Main Benefits
High particle retention capacity without affecting fluid flow
Reduced downtime from equipment failures
Custom manufacturing based on specific process requirements
Options with 2.2 and 3.1 certificates to ensure traceability and pharmaceutical compliance
Technical Specifications
Materials
Stainless steel AISI 304 and AISI 316L for corrosion resistance and pharmaceutical compatibility
Filtration Grades
- Perforations: 1mm – 6mm
- Mesh sizes: #38µ – #900µ (ISO 9044)
Available Formats
- TS1: Conical filter for fast filtration
- TS2: Truncated cone filter for greater particle retention capacity
Flange Compatibility
EN 1092 PN10, PN16, PN25, PN40 y ASME 150, 300, 600.
We Help Optimize Your Production Processes
Committed to Quality and International Standards
We use raw materials that meet the most stringent international regulations, ensuring the quality and safety of our products.
Our production is governed by the following key standards:
CE 2023/2006
Good manufacturing practices for materials in contact with food.
CE 1935/2004
Materials intended for contact with food.
FDA 21 CFR
Good manufacturing practices for pharmaceutical products.
EU 10/2011
Plastic materials in contact with food, including:
- Substances with specific migration limits (SML)
- Dual-use additives regulated by CE 1333/2008
"Made in our factory"
Each of our products is designed and manufactured in our own facilities, following the highest quality standards and with a firm commitment to the well-being of our employees.
We control every stage of the process to ensure excellence in every delivery.