Filtering Solutions for the Pharmaceutical Industry
Sintered Metal Filters
- Homogeneous filtration
- Superior mechanical strength
The sintering process optimizes filter media permeability and minimizes the risk of cross-contamination.
Sintered Metal Filters
The MLC series sintered mesh filters are specifically designed for pharmaceutical applications where purity, safety, and process efficiency are essential.
Manufactured from layers of metallic mesh bonded through a technical sintering process, these filters ensure homogeneous filtration and superior mechanical strength.
The sintering process improves permeability and minimizes the risk of cross-contamination.
Pharmaceutical Applications
Vent filters for high-shear granulators
- Ensure proper ventilation without allowing contaminant particles to enter
- Prevent harmful pressure differentials during wet granulation processes
Metal filters for fluid bed dryers
- Made of AISI 304 or AISI 316 stainless steel, with porosity from #2µ
- Enable uniform air distribution and efficient control of drying and granulation
Discs for fluid bed bottoms
- Optimize product fluidization during drying and granulation
- Available in various configurations and sizes based on equipment needs
Vacuum loading systems
- Specialized filters to prevent product contamination during pneumatic transfer
- Designed to ensure operator and product integrity during API and excipient loading
Beneficios principales
High mechanical and thermal resistance
Greater efficiency in particle retention
Reduced risk of cross-contamination
Compliant with pharmaceutical regulations (GMP, FDA, ATEX)
Available Configurations
Smooth and pleated cartridges depending on process needs
Clamp, threaded, or custom fittings
Custom dimensions and filtration grades
We Help Optimize Your Production Processes
Committed to Quality and International Standards
We use raw materials that meet the most stringent international regulations, ensuring the quality and safety of our products.
Our production is governed by the following key standards:
CE 2023/2006
Good manufacturing practices for materials in contact with food.
CE 1935/2004
Materials intended for contact with food.
FDA 21 CFR
Good manufacturing practices for pharmaceutical products.
EU 10/2011
Plastic materials in contact with food, including:
- Substances with specific migration limits (SML)
- Dual-use additives regulated by CE 1333/2008
"Made in our factory"
Each of our products is designed and manufactured in our own facilities, following the highest quality standards and with a firm commitment to the well-being of our employees.
We control every stage of the process to ensure excellence in every delivery.